Jun 03, 2024 Leave a message

How ATV Engines Work

Here's how a four-stroke engine works. The starter engages the engine and the piston moves down into the cylinder. At the same time, the intake valve opens, pulling air and fuel into the cylinder.

 

When the piston reaches the bottom, the intake valve closes and the piston starts moving back up to compress the fuel/air mixture. That is when the spark happens, creating a small explosion inside the cylinder. That burns off the fuel and air mixture and forces the piston back down again. It moves back up one more time, as the exhaust valve opens to let burnt gasses out through the exhaust.

 

In a two-stroke engine, the power cycle is completed in two rotations. The piston starts at the bottom center of the cylinder. The rotating crankshaft pushes the air and fuel mixture into the cylinder, and that mix is compressed as the piston moves upward. This is the first half of the stroke.

 

When the piston gets to the top center position, the spark plug ignites the fuel and air mix, which pushes the piston back down. Exhaust gases are expelled as more fuel and air is brought in.

 

Fuel mix travels through the crankcase throughout this process, which necessitates oil to lubricate the case. Two-stroke engines often require pre-mixed fuel and oil. If you want to avoid this, look for an engine with an oil injection feature, which does this for you.

 

When the engine is powered through these piston strokes, whether two or four, it turns the ATV's wheels.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry