Up-Draft Type Carburetors
An updraft carburetor is a type of carburetor a component of engines that mix air and fuel together in which the air enters at the bottom and exits at the top to go to the engine.
An updraft carburetor was the first type of carburetor in common use. In an updraft carburetor, the air flows upward into the venturi according to Edward Abdo in Power Equipment Engine Technology. Other types are downdraft and side-draft carburetors. An updraft carburetor may need a drip collector.
Down-Draft Carburetors
This carburetor operates with lower air velocities and larger passages. This is because gravity assists the air-fuel mixture flow to the cylinder.
The downdraft carburetor can provide large volumes of fuel when needed for high-speed and high-power output.
In this type of carburetor air comes from the top of the mixing chamber, and the fuel comes from the bottom of the mixing chamber, here also the same principle works, due to low pressure created by the two venturis fuel comes out through the pipe and then the mixing of fuel and air occurred here.
Horizontal Type Carburetors
This type of carburetor is used when we have the constraint of space for assembly. In horizontal or side draught carburetor, as the name suggests, the jet tube is placed in a horizontal direction. One more advantage of this type of carburetor is that it reduces the resistance of the flow due to the absence of the right-angle mechanism in the intake area.
The working principle of this type of carburetor is very simple. Here the carburetor stays in the horizontal position where the air is coming in through one end of the carburetor shown in the below figure. And mixed with fuel to make the air-fuel mixture and then the air-fuel mixture is going to the engine cylinder for combustion.




